How To Tip A Soldering Iron

Wipe the iron on a damp sponge to remove the excess.

How to tip a soldering iron. You need to rub the tip on the block while rotating it. The size composition and configuration of the tip being chosen should be determined by the requirements of the intended application and by. Use the lowest possible temperature to prevent premature wear to the tip and to prevent damage to the components.

Metal wool is another common and effective tool used to clean soldering iron tips. The tip smokes and melts into the block and you should apply solder to tip at this point. Use set screws to re-assemble the iron.

Touch the solder to the tip of the iron and make sure the solder flows evenly around the tip. How to Tin a Soldering Iron Tip or Re-tin an Old Soldering Iron Tip - YouTube. How to Select the Proper Soldering Iron Tip and Desoldering Nozzle for your Application.

Gently touch the soldering iron tip to the specified position of the sensor about 5 seconds Read the test temperature T result from iREWORK software or LCD Screen. Be sure that the soldering iron tip is held in the horizontal to the sensor with minimal movement to maximize physical contact between the middle of the working surface of the tip. If not wait a bit more or add more water to the sponge if its too dry.

The maintenance of a soldering A soldering iron tip should be cleaned regularly by removing any oxidized solder flux residue and debris from the tip. Soak the sponge using the water squeeze it out a little then use it to clean the tip of the soldering iron. When the iron is hot wipe both sides of the soldering tip on the sponge.

Clean the iron tip. Plug in the iron and switch it on. This step will coat the iron in a mixture of flux and solder.