How To Solder Two Wires Together

Touch the tip of the soldering iron to the copper wires.

How to solder two wires together. In this you have to use a soldering iron and melt the solder into the filaments. Strip both wires back by 810 mm. Bring both stripped ends together like shown in the image below.

First place the solder on the tip to allow for melting. This process should melt the solder and coat both wires evenly. Youll also need some PVC shrink tube.

Soldered joints are mechanically weak. The best way to splice wires is to wrap them together tightly using multiple twists to ensure maximum contact between the two wire sections. The process of soldering is taking two or more wires and joining them together and then using heat to melt electrical solder connecting those two wires permanently.

If you want you can add soldering resin to the wire filaments. Place soldering iron under the wire. This technique is good for both stranded wires and solid wires.

To tin a wire apply the tip of your iron to the wire for a second or two then apply the solder to the wire. Strip a short section of insulation off each wire end. Twist and fold 2.

Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. On a basic level there are essentially two types of solder wire lead-free solder contains mix of copper and tin and leaded solder contains tin and lead. The process is carried out using a small amount of metal alloy known as solder and a heated handheld tool called a soldering iron.