How To Clean Soldering Iron Tip
Wire wool has the advantage of not cooling down the.
How to clean soldering iron tip. Put a good amount of solder on the tip when storing it or leaving it idle for any length of time. Cover the tip with solder during idle time. Use a damp sponge to clean the tip and wipe it off quickly to avoid cooling the tip excessively.
This step will coat the iron in a mixture of flux and solder. Clean the tip. Wipe the iron on a damp sponge to remove the excess.
Quickly insert hot soldering iron into coils of brass wool tip cleaner and twist it few times. Apart from removing the flux off it is essential to clean off surplus solder. Maintaining the right operating temperature ie 320 C.
Then dip the tip in the cleaner and do a slight twist action. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. Switch on the Soldering Station or the Iron and Make sure it is Hot Enough.
This will remove oxidation from the iron tip and leave a thin layer of solder on the surface of the iron tip. A solder pot may also be used to tin or re-tin your soldering iron tip. Wipe the iron on a damp sponge to remove the excess.
Wipe OFF the solder on the Cleaning Sponge or Copper Wool. Practice good tip care. How to clean and re tin your soldering iron - YouTube.