How To Clean Soldering Iron Tip Without Flux

To apply the tip cleaner first heat the soldering iron.

How to clean soldering iron tip without flux. The maintenance of a soldering A soldering iron tip should be cleaned regularly by removing any oxidized solder flux residue and debris from the tip. Do not touch it with bare hands. Clean the Tip.

You also can clean your soldering iron tip with a sponge while using it to keep it clean. If the tip is plated it should never be filed or heavily abraded. Wipe the iron on a damp sponge to remove the excess.

Apply solder to the connection and not directly to the tip If solder must be applied directly to the tip vary the contact point. Once clean and shiny perform tinning and now your tool is ready to use. When done correctly the liquid solder should attach to the cold screwdriver properly thereby allowing you to get rid of it from the surface.

In the second step another fluid is used to rinse away the solvents leftovers. Switch OFF the Soldering Station or the Iron. Yes solder can be used without flux.

Tinning is more effective when done on a clean tip. A clean and tinned soldering tip conducts heat through the desoldering braid better and starts the wicking action faster. The first thing you have to do is cleaning the tip.

To do so you will need something other than flux to break down the oxides on the metal surface without which your surface may be damaged or not properly cleaned. Then push it on a clean sponge for cleaning. Dip the end of your solder wick into the flux a little and heat it with the iron.