How Often To Replace Soldering Iron Tip

I found some ideas by researching on the internet heat it and dip it ice water penetrating oil Deoxit etc but so far nothing has worked.

How often to replace soldering iron tip. Replace a Soldering Iron Tip When You Have To. It is ideal for tinning the tip of your soldering iron on a regular basis even at rest or not in use. The longer oxides and charcoaled flux residues remain on the tip the harder they become to remove so its a good idea to clean the tip every time you use your iron.

In between uses make sure the tinner is on the tips and stored in an airtight container. 1How often do I have to wipe the iron on the brass sponge during the. However when used for an extended period you will have to replace the iron tip.

The tip will be oxidized if you overheat it. Try the 3 cleaning methods mentioned above and failing those just get a replacement iron tip. Lastly youll slide the retaining nut over the tip and tip-retaining sleeve and tighten by hand.

A well-maintained tip can be used without a problem as long as the iron plating on the tip stays intact. If you let the iron tip get to the highest heat without solder wetted onto its tip. Overheating the tip Your soldering iron should be set to 100C of the solders melting point.

Having a stained glass soldering iron in good condition and keeping it that way will make a huge difference in your enjoyment and success at soldering well. Your soldering iron expands and contracts when it heats and cools and an excessively tight locking nut can bind. Then dip into the tin of tinner cleaner with a slight twisting action.

Nonetheless the process of removing the tip and replacing it is generally the same. Dont for instance wipe it off put it in the holder then leave it on over lunch. Unplug it if you wont be using it for a while.