How To Clean Oxidized Solder Tip

Just like with sandpaper you must tin your soldering tip after cleaning to prevent prolonged oxygen exposure.

How to clean oxidized solder tip. Clean off the FS-100 paste from the tip surface with a cleaning sponge or cleaning wire. The flux in tip cleaner removes the oxidisation and build up from the soldering iron tip and then the solder re-tins the tip. Each one of them requires special tools.

Prepare a natural sponge by soaking it in water then squeezing it as dry as you can. You simply coat the tip in the paste and then wipe it off. How to repair and renew worn out solder tip.

If the tip is still not clean and shiny then use a tip cleaner. Repeat steps 2 and 3 until the oxidation has been completely removed and the tip shows a good wetting on all its working. This completes the re-tinning process and provides a protective layer of solder to prevent oxidation.

Apply solder to the tip to see if the solder melts. Wire wool has the advantage of not cooling down the soldering iron. When doing splices clean the wires by scrapingbrushingsanding solder tin the wires to be joined slide clear heat shrink tubing over one wire lay the tinned ends together and touch them with the soldering iron and they will fuse nicely then slide the clear heat shrink tubing over the joint heat shrink one end pack it with petroleum jelly then heat shrink the other end.

Below are some great tips to use to clean an oxidized solder tip. If solder is not wet on the tip surface the tip is oxidized. Have a can of rosin and solder ready for use can open and o.

Only stop after the solder sticks to the tip like water does to glass. Clean the Tip. Case 1 If the tip oxidizes.