How To Remove Rubber From Exhaust Pipe

Secure the piping with muffler clamps.

How to remove rubber from exhaust pipe. Often you can just wipe soft fresh rubber away with a. This is a guide about removing melted plastic from a chrome exhaust pipe. You actually start your bike to get the pipes hot and use a rag with the product applied to it to rub out the markings.

Leave the saturated cloth on the mark for a few hours to soften then rub off. Try to remove the rubber from the pipe as quickly as possible. Slide the new muffler hanger into the rubber eyelet then coat the end of the new mufflers pipe with a spray-on exhaust sealant and slide the pipe into place over the existing exhaust pipe.

I dont think this would work real well if there is much rubber built up on the pipe but it might. Polish the exhaust pipe with the chrome cleaner-soaked. If the material is fairly easy to melt you may be able to use and old iron to melt or soften it up and then wipe it away with a cloth.

Any tips would be greatly appreciated. Use GooGone or bug tar remover. I have a largish flat bladed screwdriver ie.

Get some S100 paste available at the HD stealership. Use a dry rag to remove any dirt from inside the tip of the exhaust. Wipe the exhaust pipe with a clean cloth or rag to remove any cleaner residue.

While still hot take a slightly damp rag and wipe off as much of the rubber as possible. Displace the hanger accordingly and pull the pipe out of it. Of a chrome cleaner on the cloth or rag.