Proper Way To Solder Two Wires Together

When done properly you have a strong conductive connection that turns two separate wires into one.

Proper way to solder two wires together. Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool. When soldering it is always a good idea to disconnect the wires from the electronics whenever possible as the heat can easily transfer to the electrical components. Tin the soldering gun ie melt a little solder on it.

After making the repair let it cool slightly. Alternatively apply solder to stranded wire. Add a comment.

So the following technique may be a good technique when soldering ticker wires. Solder the Splice Together. Now that the two tinned wires are wrapped around each other we can re-apply the soldering iron and the solder from each wire will melt and mingle forming a nice solid solder joint.

This process should melt the solder and coat both wires evenly. Connecting two wires can be done with a wire stripper and electrical tape but to make a proper connection you should solder them together or at least use wire nuts. Make sure the cable grips grip the outer sheath left not just the inner wires right.

Heres the right way to do it. Solder is a metal alloy with a low melting temperature point used alongside a soldering iron to permanently join together two metals with a higher melting point. The solder should be fed into the cool side away from the heat which allows it to be drawn in smoothly by the heat transfer through the wires.

But even in the soldering community theres still room to argue. You may think this would be easy. How to Solder Stranded Wire to Solid Wire Cut the two wires to be soldered together to the appropriate length as needed for your project.