How To Use A Router Table As A Planer

Provide easy access to the mains and due power connection and check that the table power switch is operable to be able to activate and turn the tool off when needed.

How to use a router table as a planer. Put the router on the jig and pluge down lightly until you make contact with the work and lock the plunge depth. Make sure the insert plate holding the router tool is properly attached and sits in. Hold your router tight to the straight edge and begin cutting.

Drill out a large hole in the center of the plywood. If you find your router pulling away from the straight edge your direction of feed is backwards. Mount the screws with the heads raised slightly.

Masuzi January 29 2018 Uncategorized Leave a comment 74 Views. Using a combo-square mark lines across the jig at the edges of the hole. WITH THE ROUTER OFF move the jig around until it finds a high spot.

Cut the lumber to width plane it to the correct thickness and begin routing the profiles on the face of the stock. Diy router sled tutorial for the big make your router think it s a jointer easy and adjule diy router planer slab flattening mill woods. Feed the material from right to left.

Simple Router Planer Jig - Woodworking how to How to plane wood using a router and a straight bitPlanningSurfacing Burl or Curly wood can be a challenge sometimes you cant use a planer. You can use an inverted table-mounted router to straighten narrow edges. Using readily available lumber and a few specialty router bits anyone with a router table planer and table saw can make their own crown molding.

The second part of the sled is a bridge that holds the router and rides on top of the sled box. Remember the bit rotation from the top is clockwise so with your straight edge on the left make a push cut and the rotation will hold the router tight to the fence photo 13 - above. The router will be attached to the insert plate with bolts which are inserted into the plate and go through to the router base.