How To Tin New Soldering Iron Tip

Use Plato Tip Tin TT-95 Tip TinnerCleaner.

How to tin new soldering iron tip. The trick is to apply the solder AS its heating up. Thank you for watching. Apply liquid flux to the working area of the tip and submerse it into the molten solder in a smooth even motion.

Consequently get these two to come into contact with each for a split second on all the sides of the soldering irons tip. Insert your prepared tip into the soldering iron. How to Tin or Re-Tin Soldering Iron Tip.

That would give the tip time to burn which from the sounds of it is exactly what happened. It is well worth the modest investment regardless of the cost of the iron itself. Soak the sponge using the water squeeze it out a little then use it to clean the tip of the soldering iron.

This is done by first ensuring the tip is clean and free of surface oxides. Thanks guys Bob C. A polyurethane foam bar with embedded abrasives which is used to polish the working end of the tip to remove surface oxides.

When you get a new soldering iron tip you should lower the temperature to about 70 of the temperature you normally use on the station considering the type of solder you use lead-tin or lead free. Holding the solder in one hand and the iron in the other briefly touch the solder to both sides of the tip. Your soldering iron tip is now as shiny and good as new.

Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. Wipe the iron on a damp sponge to remove the excess.