How To Solder Wires Together

The majority of solder comes in the form of a coiled length of wire or less commonly as pellets with a range of diameters or gauges available to suit various applications and joints.

How to solder wires together. You can solder any metal objects together even wires to other wires. The process for soldering 3 wires together is the same as splicing 2 4 or even 10 of them. Strip a short section of insulation off each wire end.

You simply touch the freshly tinned tip of your soldering iron onto the bare wires for a couple of seconds and then apply the solder at which point it will smoke and flow over the wires almost immediately and you can withdraw the solder and then the iron and you should be left with a. Solder the Wire Joint. Ad Quality Solder Wire Drawing Machine.

Lock and Firmly Twist the Stripped Wires Together. The solder will fill the gaps and will increase the strength of the joint. The process will form a good solid joint.

You can also apply some solder. The wires will melt and will get soldered together. Keep the iron in place and touch the solder to the wire until its fully coated.

This will heat the wire to allow your solder to melt. There are three main ways to solder wires together. 2 Heat the joint with a soldering iron or pencil from underneath.

Lay them together overlapping at the soldered part then blob them together. If the wire is stranded twist the strands together with your fingers. The challenge is holding the wires in place long enough for the solder to cure.