How To Solder Wires At Home

If you want you can add soldering resin to the wire filaments.

How to solder wires at home. At some point over the next 2-10 seconds depending on how hot your iron is the wires will be hot enough to melt the solder. There are multiple techniques for splicing wires without solder that result in a tight wrap including some that overlap the wires before twisting to give a larger overall spliced area. Cover the connection with heat shrink.

If the wire is stranded twist the strands together with your fingers. If you want to join two wires with solder the first thing you should do is to tin the two wires. Soldering Two Wires.

The solder jar is made up by approx. Too much or too little flux will cause problems with the solder attaching to the parts. If you use flux it must be for electronics any other will ruin the wire in a short time as most are acid.

How to Solder Wires. If possible try to open earphone casing using blade. Tin coat with solder the soldering tip first.

You can touch the solder to the wires not to the tip of the iron periodically to see if its hot enough. When soldering there are a few tips and tricks to get the best connection possible. A cold solder joint happens when the hot solder hits a cold wire hardening it.

Dont burn the ending of coloured wire. Making a soldering litz wire is of as following. With a drop of solder on the iron you hold the wire in the drop and add a bit of resin core electronics solder and the wire will take the solder if a few moments.