How To Solder Small Wires
Tin the wire and the tab.
How to solder small wires. Then twist the stands together. The wires here are 24AWG and while they are not necessarily tiny by some standards f. Hold the two tinned wires on top of each other and touch the soldering iron to both wires.
Get a tiny ball of solder on the tip of your iron and touch it to the joint. I tried lower heat it burns off the enamel coating but leaves the wires black and solder will not stick. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden.
Then put the wire in the path where you need to attach it. I solder the shield connection first. Once you have a nice even layer of solder on both position them mechanically and apply a little more flux.
Meets The EU RoHS Directive 201165EU Claim. Use electrical tape over the bent wire and secure it. How to Solder Two Small Wires - YouTube.
At this point you may want to trim the tinned end of the wire a little if it is too long. If you have a tiny ball of solder on the tip you can get the ball to stay behind at the joint as DZE indicates. In this video Im going to show you how I solder small wires on a PCB.
Ensure that the wire does not move and is fixed in its place. Repeat this process on the other wire. Pinch the wire tip between the solder and the iron tip to tin and flow the wire end.