How To Solder Small Wires Together
Let the solder melt and flow over the wires.
How to solder small wires together. Preload the Soldering Iron Tip with Solder Wire. Put just enough solder to fill the joint. Usually no additional solder is necessary.
Using the soldering gun heat the wiring up enough to melt the solder and gently apply the soldering to the wire with the soldering gun touching the wire. Furthermore what is the best way to solder wires together. Do not take the ends of the different wires and make a twisted tie.
Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. One can be melting attaching the solder to the pin header and cutting the unwanted part using the hot soldering iron.
How to Solder Wires Together Correctly Like a Pro. Ad Find Every Electronic Parts on Octopart. Leave a correctly sized solder gap between insulation and solder joint.
Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires. Simply tin both wires with suitable flux being used then lay them with the bare ends side by side and touch the hot iron to the pair. Bringing copper wires together through soldering may be necessary to fix electronics or used for a wide range of metal art projects.
Then place the wire on top of the cool solder and use the soldering iron to melt it all together. Soldering by Heating the Wires Directly. Soldering is the process of using a melted filler metal solder to join your desired pieces of metal.