How To Replace A Soldering Iron Tip

How to change them.

How to replace a soldering iron tip. How do I change the soldering bit on an iron. Melt a small dot of solder over the tip in a thin coat. Take your replacement soldering iron tip and fit it into the sleeve and slide it back on the heating element as it was before.

Tips for one brand of soldering iron are often not compatible with others so be sure to verify that tips are designed for your soldering iron before buying them. The best tip tinner is your solder--tips should always be coated with a small amount of solder. Basic product instructions and quick fixes to more challenging repairs heres what we did to make our soldering tools work.

Just let you iron cool down unscrew pull out old tip put in new tip and tighten the screw again. Place the desired tip into the retaining sleeve and slide it back onto the soldering. Not familiar with your makemodel but Ive had some success with various irons by applying a light smear of regular white heatsink paste when fitting a new tip.

Our battery supplier obsoleted this item on us so unfortunately we have to pass on that obsoletion. If applied evenly this will keep the irons heat flow in check when it is next used in addition to preventing rust accumulation. Always treat tips as thought they are hot even if you know that it isnt Do not use excessive preassure when soldering you can damage your tip and your project.

I guess I could also invest in one of those old thermite irons. When you are finished soldering apply a thin layer of solder to the tip this will help prevent oxidation Never use the tip as a pry bar or screwdriver Use the lowest temperature possible this will prevent premature wear tot he tip and damage to the components Always use a tip. Depends on your soldering iron.

Overtime the tip can become damaged from extensive soldering and will become brittle or melt during the process. So you will need to replace the current. You can purchase a new tip online or at your local hardware store.