How To Prime A Soldering Iron Tip

Maintain your soldering iron for long life by keeping the tip clean.

How to prime a soldering iron tip. Keep in mind you should lower the temperature down to about 500F for this process. Ad Compare a Huge Selection of Parts. This helps remove impurities such as remnants of solder from previous projects grease oxidation etc.

Then slide the retaining nut over the tip and sleeve and tighten it using your hands. Clean the tinned tip and you have a refurbished soldering tip. Ad Compare a Huge Selection of Parts.

Wipe the iron on a damp sponge to remove the excess. Heat it up to around 350C and wait. In this video I show you how to tin a soldering iron tip old or new and other care tips.

A soldering iron tip is beyond any hope of effective cleaning or repair if any part of the iron tip no matter how small has worn all the way through. After a minute or two the iron should be hot enough to steam when touched to the sponge. There are screw type tips tips that screw onto or into the solder iron element slip on tips that slip over the element and plug type tips that slide inside of the element.

Place the soldering iron tip onto the sensor and apply solder as if you were making a solder connection. Search Findchips and Save Today. After soldering immediately coat the tip in fresh solder.

Fit the new tip into the retaining sleeve and screw it back to the heating element. Search Findchips and Save Today. Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron.