How To Prepare Soldering Iron Tip

The gas soldering irons is an excellent alternative to electric soldering irons it is indispensable in places where there is no power supply.

How to prepare soldering iron tip. Your goal is to remove old solder from the tip. Before you can start soldering you need to prep your soldering iron by tinning the tip with solder. When you unbox a brand new soldering iron the first thing you need to do is tin the iron plating on the tip to help protect it from oxidation.

At this point the solder will float freely around the component lead and the pad. The hot solder on the irons tip will cause both the wires solder and the rails solder to melt into one. Apply a little solder to the irons tip and place the iron on top of the wire and lightly press down towards the rail.

Operating at temperatures exceeding 850F dramatically increases the formation of iron oxides which. In order to prep a new soldering iron you should first be aware of how to use it. Then dip into the tin of tinner cleaner with a slight twisting action.

Clear a work area then grab your soldering iron a solder sponge and water. Ad Compare a Huge Selection of Parts. Search Findchips and Save Today.

When the iron is hot wipe both sides of the soldering tip on the sponge. Do not keep the soldering iron tip more than 3 seconds on the soldering joint when soldering CMOS components. If you are taking good care of your soldering iron it would last longer than usual.

This should lead to a clean shiny tip ready for use for more info see this video. Operate at the lowest possible temperature 800F 427C or lower. If the solder tip does become oxidized apply flux-core solder to the oxidized tip.