How To Make A Soldering Iron Tip Cleaner
Wipe the iron on a damp sponge to remove the excess.
How to make a soldering iron tip cleaner. Then dip into the tin of tinner cleaner with a slight twisting action. You will find that both a damp sponge and a wire cleaner will be effective for cleaning. Melt some good quality of solder wire on the Tip.
Insert the component into the holes. Then dip the tip in the cleaner and do a slight twist action. Once clean and shiny perform tinning and now your tool is ready to use.
If all else fails Soldering Iron tips do not last forever. This step will coat the iron in a mixture of flux and solder. The whole point of keeping the soldering iron tip clean is to protect it against wear which can lead to tip failure.
Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. Brass wool in a little pot. You can separate the two parts to clean tin residual easily.
The tip with rosin core solder. This should leave the tip of the iron with a layer of solder on it. Yep a wet sponge was the tool to clean your soldering iron for decades and of course still works.
How to Clean Soldering Iron Tip. Now remove the tip and clean it with a moist sponge to remove the cleaner. Each time you clean the soldering iron and put it away apply a fresh solder to the tip.