How To Clean Soldering Gun Tip

Dont worry too much if the whole tip isnt nicely covered in solder.

How to clean soldering gun tip. There are many cleaning solutions and the cheapest and some say best is a damp sponge. Use a rag to spread the solder evenly over the tip. Then dip into the tin of tinner cleaner with a slight twisting action.

That is to say you will be cleaning the tip several times per session if your project requires you to form multiple solder joints. It would be best if you wiped the tip after each solder. A polyurethane foam bar with embedded abrasives which is used to polish the working end of the tip to remove surface oxides.

Blade tips are used for reworking a soldering section or for cleaning the pad of the soldering item. Unplug the soldering iron and allow it to cool completely. You may also use a desoldering iron to remove the solder.

Wait a few seconds to let the tip heat up again before proceeding to step 4. Touch the solder to the tip of the iron and make sure the solder flows evenly around the tip. Combinations of the HAKKO FT-710 and iron holders.

If solder does not flow onto the tip. How to clean and re tin your soldering iron Soldering tip cleaning how to clean. Cleaning Your Soldering Iron.

They will need to be re-tinned quite often if you use them a lot especially a chisel tip. This should lead to a clean shiny tip ready for use. It doesnt matter too much if its ugly as long as you can get a nice shiny bit right at the tip.