How To Clean Solder Gun Tip
Nasty stuff isnt it.
How to clean solder gun tip. Then dip into the tin of tinner cleaner with a slight twisting action. With the iron tip cold use a polishing bar. Dont carry the solder to the joint on the iron.
If the tip is very dirty you may want to dip the tip in a commercial tip cleaning paste and then wipe it clean on the damp soldering sponge. When the solder is molten place the pumps tip against the solder you wish to remove. Combinations of the HAKKO FT-710 and iron holders.
The solder melts and should stick at the tip. Once the tip is clean let it return to the operating temperature. If it doesnt you need to remove all solder and grind the tip again more thoroughly.
This will push the solder out of the holes and solder. Just rub the soldering iron tip on it after each solder. You may also use a desoldering iron to remove the solder.
Brass wool is softer and less abrasive while the harder stainless steel wool has a longer life. Heat it up to around 350C and wait. Another option is to use tip cleaner.
Apply a small bead of solder to the copper part of the tip. Answer 1 of 2. Press down on the plunger or the bulb.