How To Clean Old Sewer Pipes

The sewer clean out is a capped pipe located on or near your property line which connects to the lateral sewer line.

How to clean old sewer pipes. After using a sewer jet it is always a good idea to test the integrity of your sewer systems using a hydrostatic line tester. Compared to hydro jetting it is a much safer method. The backward jets serve two purposes.

This method is great when you have a clog but were talking about descaling the inner walls of the old cast iron pipes to get them back to their original state of flow capacity. To install a new pipe-liner in an old sewer pipe first the pipe must be thoroughly cleanedcabledjetted and inspected with a video camera to ensure the pipe can be lined without any problems. A more typical force is between 1000 and 4000 psi which works great for clearing a drainline.

You can also use citrus-based cleaners for this. Leave the cleaner to circulate for as long as instructed on the bottle. A sewer jet will blast away the blockage and restore the pipes to a good condition.

Both of these methods will remove roots buildup and blockages to prep for Pipe Relining installation. Water pressure can achieve a high force and can cut pipe depending on the pipe strength and thickness at a pressure between 30000 and 90000 psi. The forward jets just break away and blockages that may be obstructing the pipe itself.

Cabling uses a plumbing snake and cables to manually clear clogged pipes. A couple of these methods used to clean the sewer or drain pipes are Hydro Jetting and Pipe Descaling. Put some baking soda into your lines every month or two.

Pipe Descaling is the most effective and safest method to clean out aging cast iron pipe. Instructions may vary depending on which brand of pipe cleaner you have bought so follow the instructions on the bottle and apply the pipe cleaner. Twin Home Experts explains that there are a number of methods for cleaning old cast iron pipes.