How To Clean Blackened Soldering Iron Tip

Switch on the Soldering Station or the Iron and Make sure it is Hot Enough.

How to clean blackened soldering iron tip. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. You should wipe all surfaces of the iron tip. The maintenance of a soldering A soldering iron tip should be cleaned regularly by removing any oxidized solder flux residue and debris from the tip.

Now when you finish using it store the tip with solder melted on it. Clean your tip thoroughly after every use or just before you use the iron so that all the impurities are gone. When the new soldering tip arrived it became obvious why I was struggling.

Use stainless steel wool flux and thick clothe to clean the tip. Use a damp sponge to wipe away the black oxidation from the tip of the soldering iron until the tip is silver and shines in the light. Nothing I tried worked so I decided to buy a new tip for my soldering iron.

Small contamination and oxidation on the iron tip can be cleaned by wiping a hot iron tip on the moist soldering sponge. If your tip becomes blackened and will not come clean after wiping on a damp sponge or brass pad you might try a tinning block or brass wool or a soft brass brush. Before soldering use alcohol and a clean cloth to remove contaminants such as grease corrosion and oxidation from the surface to be soldered.

Wiping the iron on an edge of a hole cut into a sponge can help to remove oxides easier and also allows waste to fall away. A Dry Cleaner special brass wool can also be used. Use a tip cleaner these usually are made from ammonium chloride and should stick to the tip when used.

Soldering iron only works if there is a temperature difference. To use the Tip tinnercleaner heat the soldering iron. A dry cleaner can also be used.