How Do You Solder Two Small Wires Together

Keep the iron in place and touch the solder to the.

How do you solder two small wires together. The wires are so small that the solder doesnt really stick so what you have to do is as quickly as possible melt the solder onto the iron but with the joint DIRECTLY in the middle of the two. Hold it on the wire for 3-4 seconds. Your solder will be applied opposite from the iron on top of the wire.

When done properly you have a strong conductive connection that turns two separate wires into one. They do tend to be a little lumpy and look a tad misshapen under the heat-shrink tube. Install the shrink wrap first solder the wires then slide the wrap to cover the solder shrink the wrap with a flame careful the wrap can shrink too much and split open then you.

I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint. Set up your work area so everything is within easy reach. A solder join - wires spliced together preferred method.

Twisting the wires together and soldering is often the best method but there are two. You want the wires to be flexible so that you can bend them while joining and splicing. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires.

Touch the tip of the soldering iron to the copper wires. This video starts by showing the simplest technique for twisting two wires together. The process of soldering is taking two or more wires and joining them together and then using heat to melt electrical solder connecting those two wires permanently.

Begin by removing the insulation from the ends of both wires you are soldering together. When you solder items together youll typically be using the hot metal tip of the iron to melt a small amount of solder alloy around and. Solder the Splice Together.