How Do You Solder Electrical Wires Together

If the wire is stranded twist the strands together with your fingers.

How do you solder electrical wires together. I will be using a power probe butane soldering gun. In order to resist being pulled apart the wires should be wrapped around each other before the soldering takes place. If youre not an old hand at soldering practice for a dozen or so joints before you try to do it under the.

Begin by removing the insulation from the ends of both wires you are soldering together. I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint. The first step is you need to strip your wires.

The wires will melt and will get soldered together. Repeat this process on the other wire. Solders primary function is conducting electricity not gluing things together though it certainly does help with that too.

Connectors work similarly placing the wires together and then closing the connector over the joined ends. This will heat the wire to allow your solder to melt. Youll also need some PVC shrink tube.

After wrapping the wires tightly around each other use a soldering iron to heat the wrapped portion of the wires. The most secure and durable way to splice two wires together is to solder them. When soldering it is always a good idea to disconnect the wires from the electronics whenever possible as the heat can easily transfer to the electrical components.

Unravel the wires as little as possible a couple of centimeters of untwisted wire should be fine Solder neatly and use heat shrink tubing to insulate the soldered joints. They should be propped up off the workspace so you can have access to the area under the wires. Connecting two wires can be done with a wire stripper and electrical tape but to make a proper connection you should solder them together or at least use wire nutsWire nuts are screwed.