How Do You Repair A Soldering Iron Tip

If all else fails Soldering Iron tips do not last forever.

How do you repair a soldering iron tip. This should leave the tip of the iron with a layer of solder on it. This should lead to a clean shiny tip ready for use. Wipe the iron on a damp sponge to remove the excess.

Wait for the soldering iron to heat up. A replacement heating element and a few hardware tools will be required. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use.

1 no temperature control designs which are usually the least expensive and suitable for household soldering jobs plug in and are ready to go after theyve warmed up. I think the best way to prolong tip is use a brass wool rather than shocking the tip with wet sponge. But its tinned for storage.

Make sure they are really tight as that is where the connection happens. This step will coat the iron in a mixture of flux and solder. Lead solder melts at a lower temp than lead free so i guess the lower operating temp also help with the lifespan.

Slide the nut and retaining sleeve off the soldering iron heating element and remove the tip from the sleeve. They usually get much hotter than a regulated iron because they always put out the same power and that power has to be enough to solder against a ground plane or something else that acts like a heat sink. This step will coat the iron in a mixture of flux and solder.

Melt a little solder on the tip of the iron. You can repair a malfunctioning soldering iron by replacing the heating element. Wipe the tip of the iron on the damp sponge.