How Do I Solder 2 Wires Together

If the wire is stranded twist the strands together with your fingers.

How do i solder 2 wires together. Replace the iron tip before turning on the iron while the iron is still cool. Soldering is used in many different facets of electronic or electrical projects. 1 clean the wires so they shine 2 twist the wires tightly together and steady the connection with clamps and 3 heat one end of the connection with the tip of the soldering iron.

Im using 20-32 gauge wire so the connections have to be small and as invisible as possible but secure because I will coat in a resin after the frame is solderedTogether. For wire tinning choose a chisel tip 332 238 mm. Lay them together overlapping at the soldered part then blob them together.

Begin by removing the insulation from the ends of both wires you are soldering together. Let the solder melt and flow over the wires. Answer this question 2.

1 Strip the wires of about 12 in. When done properly you have a strong conductive connection that turns two separate wires into one. You will burn your workbench and produce bad solder joints.

Ive changed from 25 watt to 60watt solder pen. How to Solder Stranded Wire to Solid Wire Cut the two wires to be soldered together to the appropriate length as needed for your project. Slip PVC shrink tube over one wire.

Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. Bring both stripped ends together like shown in the image below. 2 Heat the joint with a soldering iron or pencil from.