How Do I Clean My Exhaust Pipes

Wash the exhaust pipes with soap and water to remove the grime.

How do i clean my exhaust pipes. However if you are using a Dremel you might be able to cut away the remaining exposed bits of the inner pipe then get inside the pipe and grind a slot through just the inner pipe. Use the wheel brush with the degreaser to get as deep into the exhaust pipe as you can. Repeat this procedure until you are happy with the result.

Keep going until you have covered all of the exhaust pipe. Rub hard but be careful not to scratch the chrome as you wash it. Work over the pipes with a tack cloth dipped in your soap solution.

Give them a good wipe down with thinners. Clean yourself and brush and relax for 45 minutes. The discoloration of the pipes is essentially caked into the pipe so its important to get a metal polished specifically made for bluing exhaust pipes.

Focus on one square inch and complete it before you move onto the next one. Dont try to sand it or grind it or sand blast it. Cleaning that nasty carbon out of the inside of your exhaust pipes A heavy carb cleanerbrake cleaner then abrade with steel wool metal polish rinse with apc and then coat with a sealant like hydro.

Scrub the outside of the pipes with the rag then rinse off the soap with water. Its not difficult and it doesnt take long. If were talking about protecting exhaust tips from blueing the solution might be as easy as increasing the overall diameter of the tips or inserting a slightly smaller pipe inside the tip to act as a buffer between the tip and the exhaust gases.

If were talking about a set of polished headers the best solution is a heat shield. One option is called Terraclean which is a patented cleaning system that tackles everything from the fuel injectors right to the exhaust tip. Finally you need to use a clean microfiber cloth to buff the pipes.